SOFTWARE UPDATE
Analog -Digital SW update via USB
- Copy the files to USB (root).
- mb60_en.bin
- mboot.bin
- usb_auto_update.tx
- Turn power to OFF by mechanical switch(rocker switch) or removing AC plug. And plug the USB to TV
- Keep pressing OK key from remote controller and then turn the TV power to ON(by mechanical switch or by inserting the AC plug) and keep OK key pressed until the standby led blinks rapidly(rapid blinking is faster than normal blinking)
- When the led is started to blink rapidly, you can release the OK key. Wait approximately for 1-2 minutes.
- When the blinks of led is stopped, TV opens automatically with the new SW.
- Introduction for DVD option (if DVD available)
- DVD Module reads digital data stored on DVD and CD such as DVD-Video, DVD-R/RW , DVD+R/RW , CD-R/RW , CD-Audio and MP3 Audio, JPEG (Picture CD) and DivX.
- DVD module can play discs of both NTSC and PAL formats but it provides only P AL video output to LCD-TV side
- DVD Module Decode MPEG-1, MPEG-2, with or without DVD 1.0 compliant encryption, JPEG (Kodak Picture CD compliant) and MPEG - 4 (DivX Network)
- DVD Module has S/PDIF (AC-3 encoded 5.1 channel digital audio), Dolby Surround (two channel surround compatible analog audio down mixed from digital AC -3),Stereo(Analog two channel stereo) and Decoded Dolby Digital.
- Group1(Group F): English French German Dutch Spanish Italian Swedish Portuguese Danish Finnish Norwegian.
- Group2(GroupG): English German Czech Polish Hungarian Slovene Romanian Croatian Slovak Turkish.
- Factory preset of password is “0000”
- Universal service password is “1369”
- Initial parental setting should be “OFF"
Language Options
The following language groups (with the stated Code page
options) should be implemented:
Parental Password
Remote Control Software
Remote controller codes will be in universal RC -5 standard
and will be decoded with Temic TSOP 1836 (3.3V supply) preamplifier.
MAIN POWER SUPPLY SCHEMATIC DIAGRAM {Click on circuit to Magnify}
LED CONVERTER
