Tuesday, May 28, 2013

DAEWOO MATIZ CAR - LIGHTING SYSTEMS - HIGH MOUNTED STOP LAMP - Bulb usage chart



CENTRAL HIGH MOUNTED STOP LAMP [CHMSL]
  • Disconnect the negative battery cable.
  • Open the tailgate.
  • Pry off the tailgate trim panel. Refer to Section 9G Interior Trim.
  • Remove the CHMSL cover.
  • Remove the screws (1).
  • Remove the CHMSL cover (2).
  • Remove the CHMSL and bulb.
  • Remove the screws (1).
CHMSL MOUNTING BRACKET
Removal Procedure
  • Disconnect the negative battery cable.
  • Remove the center high–mounted stop lamp (CHMSL).
  • Remove the rear window wiper motor assembly. Re-fer to Section 9D, Wipers/Washer Systems.
  • Remove the CHMSL mounting bracket.
  • Remove the bolts (1).
  • Remove the CHMSL mounting bracket (2).
LICENSE PLATE LAMPS
Removal Procedure
  • Disconnect the negative battery cable.
  • Remove the license plate lamp from the tailgate handle.
  • Remove the screws (1).
  • Draw out the license plate lamp (2).
  • Remove the license plate lamp bulb (3).
  • Remove the rear window wiper motor assembly
  • Disconnect the electrical connector in the tailgate.
  • Remove the tailgate handle.
  • Remove the license plate lamp socket.
  • Remove the socket (1).
DOOR JUMP SWITCH
Removal Procedure
  • Disconnect the negative battery cable.
  • Remove the door jamb switch.
  • Remove the screw (1).
  • Disconnect the electrical connector (2).
  • Remove the door jamb switch (3).
INTERIOR COURTESY LAMP
Removal Procedure
  • Disconnect the negative battery cable.
  • Remove the interior courtesy lamp.
  • Pry off the interior courtesy lamp lens (1).
  • Remove the screws (2).
  • Disconnect the electrical connector (3).
  • Remove the interior courtesy lamp (4).
DAYTIME RUNNING LAMP MODULE
(W/Europe Only)
Removal Procedure
  • Disconnect the negative battery cable.
  • Disconnect the electrical connector (1).
  • Remove the screws (2) and the daytime running lamp module.
LUGGAGE ROOM LAMP
Removal Procedure
  • Disconnect the negative battery cable.
  • Open the tailgate.
  • Remove the luggage room lamp.
  • Remove the luggage room lamp (1).
  • Disconnect the electrical connector (2).
BULB USAGE CHART
Click on pictures to Magnify