- Press ‘Menu Up’ and dial 6483 by remote control.
- Factory mode screen will be displayed.
- Use ‘1 & 4’ keys to adjust R-Cut, ‘2&5’ keys to adjust G-Cut and ‘3&6’ keys to adjust Blue-Cut.
- To exit service mode, press ‘Mute’ button on remote control.At the second time, press ‘Display’ key to get F1 mode.
- Press ‘Ch + and Ch-‘ key to selct an item, and press ‘Volu + and Vol-‘ keys to change the data value to selected item.
- Press ‘Display’ key to exit from factory menu.
OSD
|
DESCRIPTIONS
|
RECOMMENDED DATA
|
RC
|
R-CUT
|
80
|
GC
|
G-CUT
|
80
|
BC
|
B-CUT
|
80
|
GD
|
G-DRIVE
|
64
|
BD
|
B-DRIVE
|
84
|
SB
|
0
|
|
U.BLK
|
U SIGNAL BLACK LEVEL
|
8
|
V-BLK
|
V SIGNAL BLACK LEVEL
|
8
|
LOGO
- Select ‘AV’ mode and dial 6568 to get logo display on screen.
- Press Vol+ to get ‘Logo-1’. By pressing V+ and shift the cursor and by pressing P- , P+ to change to change the character.
- To exit, press ‘Display’ key.
OSD
|
DESCRIPTIONS
|
RECOMMENDED DATA
|
H-PHASE
|
HORIZONTAL PHASE FOR 50Hz
|
18
|
V-SIZE
|
VERTICAL SIZE FOR 50Hz
|
18
|
V-POS
|
VERTICAL PHASE FOR 50Hz
|
2
|
V-LIN
|
VERTICAL LINEARITY FOR 50Hz
|
17
|
V-SC
|
VERTICAL S-CORRECTION FOR 50Hz
|
15
|
H-BOW
|
HORIZONTAL BOW CORRECTION FOR 50Hz
|
4
|
H-PARA
|
HORIZONTAL PARA CORRECTION FOR 50Hz
|
4
|
H BLK RIGHT
|
H RIGHT BLANKING
|
0
|
H BLK LEFT
|
H LEFT BLANKING
|
0
|
