REMOVAL OF FORMATTER
- Remove the cassette dust cover (RC1–5200–000CN).
- Remove nine (9) screws from the rear plate (RC1–5227–000CN).
- Remove the rear plate.
- Unplug three (3) connectors: two (2) data connectors and one (1) power connector.
Remove four (4) screws from the formatter.
- Lifting it up, remove the formatter.
- To replace the formatter, follow steps 1 through 6 above in reverse order.
When replacing the right cover, align the tabs on the upper edge of the right cover and lower edge of the face-down cover with their respective slots.