There are 2 ways of adjusting this TV :
- One is with the REMOTE CONTROL UNIT and the other is the conventional method using adjustment parts and components.
- The adjustment using the REMOTE CONTROL UNIT is made on the basis of the initial setting values. The setting values, which adjust the screen to the optimum condition, can be different from the initial setting values.
- Make sure that connection is correctly made AC to AC power source.
- Turn on the power of the TV and measuring instruments for warning up for at least 30 minutes before starting adjustments.
- If the receive or input signal is not specified, use the most appropriate signal for adjustment.
- Never touch the parts (such as variable resistors, transformers and condensers) not shown in the adjustment items of this service adjustment.
- Preparation for adjustment. Unless otherwise specified in the adjustment items, preset the following functions with the REMOTE CONTROL UNIT.
SERVICE MODE
TO ENTER SERVICE MENU
- Press the [SLEEP TIMER] key and set the [SLEEP TIMER] for [0 MIN].
- Then press the [DISPLAY] key and the [VIDEO STATUS] key of the remote control unit simultaneously, and the SERVICE MENU screen will be displayed.
RELEASING SERVICE MENU
- After returning to the SERVICE MENU upon completion of the setting (adjustment) work, press the EXIT key again.
SERVICE MENU ITEMS
- With the SERVICE MENU, various adjustments can be made, and they are broadly classified in the following items of adjustments.
SERVICE MENU FLOWCHART
Click on images to Enlarge
