- Disconnect the monitor from the power source before disassembly.
- Follow these directions carefully; never use any metal instrument except provided jig to separate the cabinet.
- Place monitor face down on cushioned table and remove 6 screws and remove stand.
- Lift up the rear cover and remove 7 screws from the power board.
- Remove 8 screws from the main board and disconnect cables.
- Lift up the power board and main board.
- Remove 6 screws from the BRKT and lift up the BRKT.
- Lift up the panel.
REPLACEMENT OF LAMP ASSEMBLY
- After confirm there is nothing on the desk, turn the LCD module over and put it on a flat desk set to the ground.
- Remove 2 screws for the lamp unit.
- Slide the lamp unit out. Please take out the lamp unit from the LCD module.
- Fix the new lamp units on the LCD module: opposite process.
