Message List
Status or error messages of the
printer are displayed on a computer screen, as the printer is not equipped with
a status display. This section will describe the messages, and their contents
and procedures displayed on the computer screen.
Status Window
CAPT displays the printing
environment and printing status on the status window. On the status window,
messages are indicated in the Message area depending on the following four
conditions:
• Idling Status
• Printing Status
• Status Not Available
• Error Status
Also, the descriptions and
procedures for the messages are displayed in the Error message area. For the
details of the status window, refer to users guide.
1. Idling status
Indicates the printer contains no
print jobs, and no problems for the printing operation.
The following three messages are
indicated for the idling status:
Message area: Printer Ready
Error message area: None
Content: The printer is ready to
print.
Message area: Printing Completed
Error message area: None
Content: The printer has
completed the print job.
Message area: Printing Stopped
Error message area: None
Content: The printer has stopped
the printing operation.
2. Printing status
Indicates the printer contains
printing jobs and has no problems for the printing operation.
The following four messages are
indicated for the printing status:
Message area: Printing
Error message area: None
Content: The printer is printing.
Message area: Printing Paused
Error message area: None
Content: The printer has stopped
the printing operation and paused, because the Pause Job button is clicked
during printing.
Message area: Stopping
Error message area: None
Content: The printer has stopped
the printing operation, because the Delete Job button is clicked during
printing.
Message area: Cleaning
Error message area: Now printing
a cleaning page. Please wait a moment.
Content: The printer is printing
a cleaning page.
3. Status Not Available
Indicates the printer information
is not available.
The following three messages are
indicated for the Status Not Available.
Message area: Status Not
Available
Error message area: The printer
is connected to a port of an unsupported type.
Content: The printer is connected
as a local printer, and the port is not supported (FILE, LPT1.DOS, etc.).
Message area: Check Print Server
Error message area: The printer
server is down or the server status window is not active.
Content: The printer is connected
as a network printer, and the status window on the server side has not been
started up.
Message area: Getting status
Error message area: Please wait a
moment
Content: The printer has not
received the port status, as the local port to which the printer is connected
has just been switched from another printer.
4. Error status
Indicates errors have occurred on
the printer.
When multiple errors occur, an
error with the highest priority will be indicated first. When the first error
is cleared, then an error with the second high priority will be indicated.
When an error occurs and then is
cancelled in the middle of printing, the printer will resume printing on the
ongoing page.
The following describes the
messages for the Status Not Available. The messages are listed from the higher
priority to lower priority.
Message area: Port Busy
Error message area: The port is
being used by another device.
Content: The port is being used
by another device.
Action: Check the port whether
the correct printer is connected to it. If not, connect the correct printer to
the port.
Message area: Check Printer/Cable
Error message area: Check the
following. Is the printer switched on? Is the printer cable connected?
Content: The printer has become
incommunicable during printing.
Action: Check the printer by
following the instructions indicated in the Error message area, and perform the
trouble shooting.
Message area: Incompatible
Printer.
Error message area: The wrong
printer is connected.
Content: The printer is not
LBP-1120.
Action: When you use a printer
other than LBP-1120, make sure to switch to the driver to which you are to
connect.
Message area: Clear Paper Jam
Error message area: 1. Open cover
2. Remove toner cartridge 3. Remove jammed paper
Content: A paper jam has occurred
in the printer.
Action: Follow the instructions
indicated in the Error message area.
Message area: Clear Paper Jam
Error message area: 4.Replace
toner cartridge 5.Close cover
Content: A jam has occurred and
then the cartridge cover has been opened.
Action: Follow the instructions
indicated in the Error message area.
Message area: Close Printer Cover
Error message area: None
Content: The cartridge cover is
open.
Action: Close the cartridge
cover.
Message area: Check Toner
Cartridge
Error message area: None
Content: The toner cartridge is
not present in the printer. Or, the cartridge is not installed correctly.
Action: Set the cartridge
correctly.
Message area: Change paper to xxx
Error message area: Change paper
to xxx or force to print on yyy.
Content: The paper to be printed
(yyy),recognized by the driver, differs from the specified paper (xxx).
Action: Switching the paper to xxx
causes the printer to automatically resume printing. Or, clicking the Resume
Job button causes the printer to resume printing with the present paper.
Message area: Add xxx Paper
Error message area: No paper
loaded in printer
Content: Print paper is not set
in the printer.
Action: Set print paper in the
printer.
Message area: Printing Failed
Error message area: Data transfer
to the printer was too late or a data transfer error occurred. Perform the
following.
1. Discard
last printed page. 2. Resume printing.
Content: Data transfer to the
printer was too late. Or, the printer cable is disconnected or the port is
connected to another printer during printing.
Action: If you follow the
instructions indicated in the Error message area, the printer will print with
lower resolution.
Message area: Insufficient Memory
Error message area: Quit all
unnecessary applications running on the machine to which the printer is
connected.
Content: The printer cannot
obtain enough work memory for the language monitor.
Action: Follow the instructions
indicated in the Error message area.
Message area: Service Error
Error message area: Printer
Error. Contact the Shop the Printer Was Bought From.
Content: A service error has
occurred in the printer engine.
