BACK COVER & BATTERY
Insert a finger into the gap as
shown in picture and gently pull upwards to release the hooks of the Battery
Cover.
Turn around and remove the
Battery Cover.
Insert a finger and raise the
bottom of the battery to release it.
Remove the battery.
Antenna BT WIFI & Antenna GPS
& Antenna Main
Remove the three Screw M1.6*4.2
by using a screwdriver with Bits (T5)
Remove the Screw Lanyard M1.6*3.2
by using a screwdriver with Bits (T5)
Remove the Antenna BT WIFI by
using a Flex Film Assembly Tool.
Remove the Antenna GPS by using a
Flex Film Assembly Tool.
Remove the Antenna Main by using
a Flex Film Assembly Tool.
Rear Cover: Remove the RF Rubber
by using a Flex Film Assembly Tool.
Remove the Screw M1.6*4.2 by
using a screwdriver with Bits (T5).
Remove the three Screw M1.6*2.8
by using a screwdriver with Bits (T5)
There are ten snap hooks securing
the Rear Cover.
Insert a Guitar Pick as shown in
picture and gently pull upwards to release the three hooks of this side.
Do the same to the top side.
See the next post for more