Sunday, May 04, 2014

HOW TO ENTER SERVICE MODE - PANASONIC TX-32LXD500 - TX-26LX500F – LED BLINKING CODES - WIDE LCD TV

APPLICABLE TO: PANASONIC TX-32LXD500_TX-26LXD500_TX-32LX500F_TX-32LX500P_TX-26LX500F_TX-26LX500P [LH41 Chassis]
SERVICE MODE
MPU controls the functions switching for each IICs through IIC bus in this chassis. The following setting and adjustment can be adjusted by remote control in Service Mode.
How to enter SERVICE 1
1. In main menu, move to choose sound menu, set BASS to MAXIMUM, and set TREBLE to MINIMUM.
2. Simultaneously press INDEX button on remote control and DOWN button on the TV set.
How to enter SERVICE 2
1. Enter the SERVICE 1 mode.
2. Set the channel to CH 99.
3. Press HOLD button on remote control.
To exit from Service mode, press N or Power button on remote control.
SERVICE-1
SERVICE-2
POWER LED BLINKING CODES [Fault Codes]
When an abnormality has occurred the unit, the protection circuit operates and reset to the stand by mode. At this time, the defective block can be identified by the number of blinking of the Power LED on the front panel of the unit.