.jpg)
Defect. Some
cases where the HDMI OUT is not
recognized by HDMI IN TV.
Cause: Possible failure in the database of the MPEG;
Workaround: Upgrade the software as described below:
Cause: Possible failure in the database of the MPEG;
Workaround: Upgrade the software as described below:
How to get into Information
System:
* Enter SETUP menu appears on the display after the message "No Disc"
* In SETUP, go to "TV Aspect" and move the cursor to [Highlight] option 16:9.
* Press button "to the right" using the remote control.
* Type 1_ 3_ 9_ 7_ 1_ 3_ 9_ ENTER.
* Note the "Device Model" that appears NATV.
* Enter SETUP menu appears on the display after the message "No Disc"
* In SETUP, go to "TV Aspect" and move the cursor to [Highlight] option 16:9.
* Press button "to the right" using the remote control.
* Type 1_ 3_ 9_ 7_ 1_ 3_ 9_ ENTER.
* Note the "Device Model" that appears NATV.
How to update DVD program:
# Change the filename to download as "LG_ (model name) _ (Version). ROM” "[Case name File, possible lyrics]".
# Save the file to the root folder of the blank CD.
# Insert the CD set and the download will begin automatically.
# Rate of progress of the update is displayed, and then the door will open when the download is complete.
# Remove the disc.
# Disconnect the power cord and plug it in and then enter into system information.
# Disconnect power, wait a few moments and reconnect.
# Change the filename to download as "LG_ (model name) _ (Version). ROM” "[Case name File, possible lyrics]".
# Save the file to the root folder of the blank CD.
# Insert the CD set and the download will begin automatically.
# Rate of progress of the update is displayed, and then the door will open when the download is complete.
# Remove the disc.
# Disconnect the power cord and plug it in and then enter into system information.
# Disconnect power, wait a few moments and reconnect.
