SOFTWARE ADJUSTMENTS
There is 2set to download the
binary image into your device.
First set.
1. JIG BOX (UMTS TEST JIG:
GH80-03308A)
2. USB Cable: JIG to PC
3. Test Cable: JIG to SGH-i780
(GH39-00993A)
4. Power Cable: JIG to power
supply
5. Serial Cable: SGH-i900to PC
6. Power Supply
7. RF Cable(GH39-00599A): to Agilent8960or CMU200
8. Test Cable: JIG to SGH-i900
(GH39-00990A)
Second set
1. USB DATA Link Cable:
GH39-00922A
2. Battery: GH43-03110A
Software Download
Equipment for Software Download.
Pre-requisite for Download
▶ Downloader
Program - [Image Version].exe
▶ USB Driver -
PDA: Samsung MITs USB Sync[Samsung MITs USB Sync.zip] - Phone: Samsung CDMA
Modem[Samsung CDMA Modem.zip]
▶ SGH-i900
Mobile Device
▶ Driver
Installation.
Driver Installation (PDA)
▶Make sure
that you install drivers.
▶If you
installed the latest ActiveSync program, you don’t need to install the
pda driver. Please install the latest ActiveSync program.
Driver Installation (Phone)
When you download the phone
image, youneed the driver of Samsung CDMA Modem.
If you want to download the phone
image, install the Samsung CDMA Modem driver.
After you install the driver of
Samsung CDMA Modem, please restart host computer.
Execute the Downloader Program. [Image
Version.exe]
Turn off your device.
Connect your device to a host
computer by using USB DATA Link Cable.
Turn on your device and wait until' START' button is
activated.
If "START" button is not activated, terminate the application
and reconnect USB data link cable and retry.
Please click “START” button.
When the download is finished, the phone is rebooted
automatically.
Download Procedure
Job Done
Trouble Shooting
“PDA Device not found” message.
Make sure that your device is connected a host computer by
USB DATA Link cable.
After you install“ phone USB driver(Samsung CDMA Modem)”at
first time, you may see “Port open failed…”message or application hang while
downloading a phone image. If so, terminate the application and then try the
download again.
If USB port is changed, at first time you may see “Port open
failed…”message or application hang. If so, terminate the application and then
try the download again.
If USB cable to the mobile device is not connected tightly,
you may see “Port open failed…”message or application hang. If so, terminate
the application and then try the download again.
If you always see“ port open failed” message or application
hang,
1. When failed application is activated, go to the device
manager, remove the SAMSUNG CDMA Modem and SAMSUNG USB Composite Device.
2. Rename C:\WINDOWS\system32\drivers\Modem.sys to other
name.(ex. Mod em-.sys)
3. Go to control panel->program add/remove, and then
remove Samsung CDMA Modem driver or Samsung USB driver(MCCI)
4. Restart your PC.
5. Install attached SAMSUNG CDMA Modem_4.34
Try the download again.
“Write Failed” message
If battery level is low, use charged battery and try again.
How to deal with an error in the computer USB port of the
computer.
Symptom: Device is not identified after connecting it.
Cause: The device is connected before the previous
connection is complete. All devices should be connected one by one. Otherwise,
an error may occur in the computer USB port of the computer.
Solution:
Proceed with the following action in order only when the
previous action does not work.
1) Unplug the USB port from the computer and plug it again.
2) Open the Device Manager and remove the USB hub and
install it again.
3) Reboot the computer.