.jpg)
* Carefully
release the screws at 7 different locations from the rear cover. (Torque:1.1±0.1kgf.cm)(Size:
M1.4*L3)
* Disengage the rear cover from the front cover by using the
hook at 12 points that colored in red (Follow the numbered sequence when you
disjoint)
* Separate the
coaxial cable of antenna assembly from the PBA.
Release the screw at 2 points(Size: M1.4*L3) (Torque:1.1±0.1kgf.cm)
* Detach the
side FPCBs from the Bracket.
* Separate all
connector ribbons from the PBA. Separate
the PBA from the Front.
* Release the
screw at 2 points (Size: M1.4*L2)(Torque:1.1±0.1kgf.cm)
* Separate the
sub PBA from the PBA.
* Separate the
Receiver assembly from the Front.
(Insert
along nose tweezers into the holes for easy separation.) Be careful not to damage the FPCBs.
CLICK ON THE PICTURES TO MAGNIFY
