ApplIcable to SONY - KDL-40XBR4_ 40XBR5_46XBR4_46XBR5
.jpg)
To adjust
various set features, use the Remote Commander to put the set into service mode
to display the service menus.
TV should be
in standby mode. (Power off).
Press the
following buttons on the Remote Commander within a second of each other:
Display > Channel (5) > Volume (+) > TV Power.
The first
service menu (TV) displays.
To display
the service menu that contains the category you want to adjust, press (JUMP) on
the Remote Commander.
CLICK ON THE PICTURES TO ZOOM IN
The screen
displays the first category in the selected service menu.
To change the category, press (2) or (5) on
the Remote Commander.
Note:
Pressing 2 or 5 only changes the categories within the service menu displayed. To
change a category on one of the other service menus, press the {JUMP} button
until the correct service menu is displayed.
To change
the adjustment item, press (1) or (4) on the Remote Commander.
To change
the data value, press (3) or (6) on the Remote Commander.
To write
into memory, press {MUTING} then (0) on the Remote Commander.
To exit
service mode, turn the power off.
UPDATING
MODEL INFORMATION AFTER REPLACING THE FB1 BOARD.
Access the
Service Menu (as described above)
Press the {JUMP}
button until the BEM micro service menu displays.
Press (2) until
the (0001 MODEL_INFO) category displays.
Using the (3) or (6) on the remote commander to increase or decrease the value, do one of the
following:
[If model
size is 40” > Set to (0)]
[If model
size is 46” > Set to (1)]
To write
into memory, press {MUTING} then (0) on the Remote Commander.
To exit service mode, turn the power off.
