How to enter Service Mode to Hisense LCD TVs
TO ENTER FACTORY OSD MENU
TO ENTER FACTORY OSD MENU
(a)
With factory RC (remote control)
1. Press “M”
button and enter factory mode.
2. Press
“Menu” button and enter factory OSD menu.
3. Press
“CH+”/“CH-” button select the function menu, press “VOL+”/“VOL-” enter the selected
function menu. Press “VOL+”/“VOL-” button adjust values in the menu.
(b) With
user’s RC
1. Power TV On
2. Press Menu button and call up User OSD Menu
3. Select Audio-> Balance
4. Enter 0->5->3 ->2 in sequence. Note: If necessary, re-do number keys.
5. Factory OSD appears.
6. Press Menu again and leave factory OSD.
White
Balance
Note:
Different source has different WB values. Before adjusting, please change to
desired source.
Auto Color
For VGA and
Component Video sources, WB values must be adjusted. And at others signal
sources, the “auto colour “does not work.
Before adjusting, prepare the signal instruments such as DVD or K-8256
first, and find the video picture with gray and color bars. Then change
to desired source.
Press “M”
button and enter factory mode.
Press “Menu”
button and enter factory OSD menu.
Select the
item “Auto Color”.
Press VOL+
button to auto color.
Close the
OSD menu after 5 seconds.
The factory
menu date varies according to different sources. Incase changing the factory
data by error, you can choose to “Clean Protected”, by which you can resume the
default value.
To clear the
EEPROM:
Select the
item “Clean All”.
Press VOL+
button to clear the EEPROM data.
Close the
OSD menu after 5 seconds.
Restart the
TV.