APPLICABLE TO
Grundig 32 VLC 9040 S GBI6632 _ 32 VLE 801 DVB-S GBI8732 _ 32 VLE 2020 S GBI8832 _ 32 VLE 8041 S GBI7532 _ 32 VLE 8042 S GBI8932 _ 37 VLC 300 S GBI6537 _ 37 VLC 2015 TE GBI6437 _ 37 VLC 9040 S GBI6337 _ 40 VLE 2020 S GBI8840 _ 40 VLE 8041 S GBI7740 _ 40 VLE 8042 S GBI8040
Fine Arts 32 S GBI7832, GBI7932
_ Fine Arts 40 S GBI7540,
GBI7640 _ Fine Arts 46 S GBI7446,
GBI7546
Hamburg
32 VLC 8041 S GBI8332
New York 32 S GBI9532 _ New York 40 S GBI9540, GBI9640 _ New York 46 S GBI9446
Rom
32 VLE 8061 S GBI9432 _ 40 VLE 8061 S GBJ9040
Hamburg
32 VLC 8041 S GBI8332
New York 32 S GBI9532 _ New York 40 S GBI9540, GBI9640 _ New York 46 S GBI9446
Rom
32 VLE 8061 S GBI9432 _ 40 VLE 8061 S GBJ9040
Parental Control
The personal pin can be changed with master pin 2356.
Hotel Mode
Maximum volume is limited and Menu "SOURCE SETUP" is no available at activated hotel mode.
Call up: i > 8500 > 4 "System Configuration" > 0 (OK) > 43 "Hotel" > 1 2 "AVAIL".
Switching off the Hotel Mode temporarily
At this function the activated hotel mode is deactivated until the set is switched off (standby).
Call up: i > 4658 > 1 2
Following adjustment are available in the additionally menu HOTEL
TV SETTINGS
> Maximum Volume
> Start-Up Volume
> First Power (Standby / Power On)
Cloning Function
It is possible to copy following data to an external USB stick and back to TV set:
> Channel/Video Set. Programme tables and settings of signal sources - they are transferable into further TV set of same version.
> Service Set. TV adjustments of service and special functions without panel values.
> User Set. User settings.
> ALL In case of service: If the defective chassis board are still operate, it is possible to save all adjustments / settings and copy into new chassis board.
Copy data to USB stick
Connect empty USB memory > i > 8500 > 43 "Cloner Configuration" > 4658 > 4 "Copy" > 1 2 TV to USB > 4 "Copy Item" > 1 2 Channel/Video Set., Service Set., User Set or ALL > 4 "Start
Cloning" > start with 2 > "Success" is showing at the end.
Copy data from USB stick into TV set
If necessary switch off Hotel Mode temporarily (see above) > i > 8500 > 43 "Cloner Configuration" > 4658 –> 4 "Copy" > 1 2 USB to TV > 4 "Copy Item" > 1 2 Channel/Video Set., Service
Set., User Set or ALL > 4 "Start Cloning" > start with 2 "Success" is showing at the end.
The personal pin can be changed with master pin 2356.
Hotel Mode
Maximum volume is limited and Menu "SOURCE SETUP" is no available at activated hotel mode.
Call up: i > 8500 > 4 "System Configuration" > 0 (OK) > 43 "Hotel" > 1 2 "AVAIL".
Switching off the Hotel Mode temporarily
At this function the activated hotel mode is deactivated until the set is switched off (standby).
Call up: i > 4658 > 1 2
Following adjustment are available in the additionally menu HOTEL
TV SETTINGS
> Maximum Volume
> Start-Up Volume
> First Power (Standby / Power On)
Cloning Function
It is possible to copy following data to an external USB stick and back to TV set:
> Channel/Video Set. Programme tables and settings of signal sources - they are transferable into further TV set of same version.
> Service Set. TV adjustments of service and special functions without panel values.
> User Set. User settings.
> ALL In case of service: If the defective chassis board are still operate, it is possible to save all adjustments / settings and copy into new chassis board.
Copy data to USB stick
Connect empty USB memory > i > 8500 > 43 "Cloner Configuration" > 4658 > 4 "Copy" > 1 2 TV to USB > 4 "Copy Item" > 1 2 Channel/Video Set., Service Set., User Set or ALL > 4 "Start
Cloning" > start with 2 > "Success" is showing at the end.
Copy data from USB stick into TV set
If necessary switch off Hotel Mode temporarily (see above) > i > 8500 > 43 "Cloner Configuration" > 4658 –> 4 "Copy" > 1 2 USB to TV > 4 "Copy Item" > 1 2 Channel/Video Set., Service
Set., User Set or ALL > 4 "Start Cloning" > start with 2 "Success" is showing at the end.
Service and Special Functions
Functions of the buttons
i Call up/exit the COMFORT GUIDE /
Exit the Service Mode
34 Call up the dialogue line (point of menu)
(OK) Call up the Menus
12 Changing the settings
Z Submenu: Back to main menu
Calling up the Service Mode
> Press button i (Info).
> Enter the code number 8500.
Exit the Service Mode
> Press button i.
Functions of the buttons
i Call up/exit the COMFORT GUIDE /
Exit the Service Mode
34 Call up the dialogue line (point of menu)
(OK) Call up the Menus
12 Changing the settings
Z Submenu: Back to main menu
Calling up the Service Mode
> Press button i (Info).
> Enter the code number 8500.
Exit the Service Mode
> Press button i.
POWER SUPPLY CIRCUIT DIAGRAMS
