Sony KLV-26, KLV32 NX400(S/B) - KLV
26,32 NX400(S/B)/S, 32,40 NX500 – Remote control (RM-GA018)
LED blinking codes, Service Mode and
suspected parts, Service adjustments - Exploded View.
Standby LED Error Display and Board
Replacement Order
Blinking times > Error > Defective boards
2 Blinks > Main Power Error > 1) Power Unit
(26”), G2LE Unit (32”), G2HE Unit(40”) board.
2) BAA board.
3 Blinks > DC_ALERT 1/ Audio Error/ Motionflow Error > 1) BAA board. 2) Power Unit
(26”), G2LE Unit (32”), G2HE Unit (40”) board. 3) TCON. 4) Speaker.
4 Blinks > Balancer Error > 1) Inverter board.
2) Panel. 3) Power Unit
(26”), G2LE Unit (32”), G2HE Unit (40”) board. 4) BAA board.
5 Blinks > T-CON Error / Panel ID NVM Error > 1) T-CON. 2) BAA board. 3) LVDS Cable. 4) Power Unit
(26”), G2LE Unit (32”), G2HE Unit (40”) board.
6 Blinks > Backlight Error > 1) Inverter board 2) Power Unit (26”), G2LE Unit (32”),G2HE Unit (40”) board. 3) BAA board.
7 Blinks > Temp. Error > 1) BAA board. 2) Power Unit (26”), G2LE Unit (32”), G2HE Unit (40”) board.
[Each of the above blinking repeats 3 seconds. Countermeasure is list out by priority.]
BOARDS LOCATION
SERVICE ADJUSTMENT
Accessing Self Diagnostic Menu
1. While TV on standby mode, press the following sequence on the Remote commander. [Display - 5 - Vol Down - Power]
1. While TV on standby mode, press the following sequence on the Remote commander. [Display - 5 - Vol Down - Power]
2. To Reset Error
Count & Error History [Press 8 - 0 key]
3. To Reset Panel Operation Time [Press 7- 0 key]
4. To exit, turn the power off using Remote.
4. To exit, turn the power off using Remote.
Accessing Service Mode
1. While TV on standby mode, press the following sequence on the Remote commander. [Display – 5 - Vol Up - Power]
1. While TV on standby mode, press the following sequence on the Remote commander. [Display – 5 - Vol Up - Power]
2. Use the UP or
DN [▲▼] button to select the item you want to refer and press for details.
GAISOU Adjustment (For Board
Replacement)
1) When new board is replaced, please confirm the color ornamental of the TV set.
2) While TV on standby mode, press the following sequence on the Remote commander. [Display - 5 - Vol Up _ Power]
1) When new board is replaced, please confirm the color ornamental of the TV set.
2) While TV on standby mode, press the following sequence on the Remote commander. [Display - 5 - Vol Up _ Power]
3) Use the UP or DN [▲▼] button to select the GAISOU item.
EXPLODED VIEW & PART NUMBERS
CLICK ON THE PICTURES TO ZOOM IN
