Set-up procedure of XBOX-360 to Sharp LCD TVs
Before connect the XBOX360, ensure that you’ve told your LCD TV
that you’re going to use component signal input.
Press the Menu button on the remote control.
Using the cursor arrows on the remote control, move to
“Connections” and press the OK button.
Using the cursor arrows on the remote control, move to INPUT
SELECT and press the OK button.
Using the cursor arrows, move to EXT4.
Using the cursor arrows on the remote control, more to COMPONENT
AND PRESS THE ok BUTTON.
Press the END button on the remote control.
CONNECTING THE XBOX
Connect the HD AV cable to the XBOX360 and ensure the setting
switch has been moved to HDTV.
Connect the HD AV cable to the 3 RCA to 15-pin D-Sub adapter cable
using the corresponding colours.
Connect the 3 RCA to 15 pin D-Sub adapter cable to your LCD TV.
CONFIGURING THE XBOX-360
When you power ON the XBOX360, the unit will output 720P and
display the following screen.
Using the cursor keys on the controller, move to SYSTEM.
Press the SELECT button on the controller.
Using the cursor keys, move to DISPLAY and then press the SELECT
button, then move to HDTV setting, and press the SELECT.
Then move to the output of your choice, and press the SELECT
button. [SHARP LCD TVs ONLY SUPPORT 480p & 1080i OUTPUT VIA COMPONENT. 1080p IS SUPPORTED VIA THE 2 X HDMI INPUTS
[HDMI cable not available from Microsoft]
After selecting the output, the screen will blank for a few seconds
and then display the following.
Follow the on-screen instructions using the cursor keys on the
remote controller, and pressing the SELECT button. The screen will blank again for a few seconds
switching to 50Hz.
Follow the on-screen instructions, and press the SELECT button.
You’ve now configured your XBOX for use with the Sharp LCD TV.
