ARRANGEMENT OF COMPONENT
[1] Rear cover
[2] Right cover
[3] Left cover
[4] Upper cover
[5] Cartridge cover
[6] Pickup tray
Rear Cover
Remove the screw.
Locate the claw under the area indicated by an arrow. Open
the bottom of the left/right side of the rear cover, and slide it to the front;
free the claw, and lift the rear cover to detach.
Right Cover
Remove the rear cover.
Open the cover of the cartridge assembly.
Remove the screw and, free the claw under the area indicated
by an arrow, and free the hook; then, detach the right cover.
Left Cover
Remove the screw
Open the cover of the cartridge assembly.
Remove the screw and, free the law under the area indicated
by an arrow, and free the hook; then, detach the left cover.
Upper Cover
Remove the rear cover and the left/right cover.
Disconnect the connector J203 from the engine controller
PCB; then, free the harness from the guide.
Remove the 2 screws, and free the 2 claws; then, detach the
upper cover.
Cartridge Cover
Remove the rear cover and the left/right cover.
Open the cartridge cover.
Force the front cover down to detach.
While pushing the
claw, detach the cartridge cover from the arm.
Slide the shaft, and detach the cartridge cover.
Pickup Tray
Remove the rear cover.
Slide up the pickup
tray to detach.
Contd: