Friday, October 18, 2013

HOW TO DISASSEMBLE - HITACHI - DV-DS163E / DV-DS163E(UK) / DV-DS253E / DV-DS253E(UK) - HDD/DVD RECORDER


Part [1]
DISASSEMBLY
Numbers in figures are step numbers in disassembly procedure, and letters in brackets [ ] show the types of screw.
TOP COVER & FAN REMOVAL
  • Remove the nine screws [A].
  • Remove the top cover in the direction of the arrow.
  • While extending both sides of the rear of top cover in the directions of arrows, remove the top cover.
  • Disconnect the connector of fan motor from SMPS P.C.B.
  • Remove the two screws [J].
(a) Top Cover
(b) Fan
(c) Fan Cover
CLICK ON THE PICTURES TO ZOOM
FRONT BLOCK
  • Disconnect the FFC on MAIN P.C.B (b).
  • Release the seven tabs.
  • Remove the front block (a) in the direction of the arrow.
(a) Front Block
(b) MAIN P.C.B
TIMER-1 P.C.B, TIMER-2 P.C.B, Front Panel
  1. Remove the three screws [B].
  2. Disconnect the two connectors.
[During reassembly, attach the earth plates (d) to the specified positions, making sure the orientation is correct.]
(a) TIMER-1 P.C.B
(b) TIMER-2 P.C.B
(c) Front Panel
(d) Earth Plate
MAIN P.C.B
  • Disconnect the four FFC.
  • Remove the two screws [C] and the two screws [D].
  • Remove the MAIN P.C.B (a) from the I/O P.C.B (b) in the direction of the arrow.
The MAIN and I/O P.C.B are directly joined via the connector: Removing the MAIN P.C.B in a direction other than that of the arrow could damage the connector.
Caution during disassembly and reassembly:   Securely connect the MAIN and I/O P.C.B.
(a) MAIN P.C.B
(b) I/O P.C.B
(c) HDMI Block
(d) SMPS P.C.B
CONTD: