Friday, October 18, 2013

HITACHI - HDD/DVD RECORDER _ DV-DS163E_DV-DS163E(UK)_DV-DS253E_DV-DS253E(UK)


DISASSEMBLE PROCEDURE  Part- [2]
Power Cable, SMPS P.C.B.
Power Cable (a)
  • Disconnect the connector of the power cable.
  • Remove the power cable from the rear panel (e).
SMPS P.C.B (b)
  • Disconnect the two connectors.
  • Remove the four screws [C].
  • Remove the SMPS P.C.B from the I/O P.C.B (c) in the direction of the arrow.
[The SMPS and I/O P.C.B are directly joined via the connector: Removing the SMPS P.C.B in a direction other than that of the arrow could damage the connector.]
Caution during disassembly and reassembly: Securely connect the SMPS and I/O P.C.B.
(a) Power Cable
(b) SMPS P.C.B
(c) I/O P.C.B
(d) HDMI Block
(e)  Rear  Panel
(f) MAIN P.C.B
HDMI Block, HDMI P.C.B
  • Disconnect the FFC.
  • Remove the screw [G].
  • Remove the screw [C], and then lift the unit of the HDMI block (a).
  • Remove the two screws [H] and remove the HDMI P.C.B (b).
(a) HDMI Block
(b) HDMI P.C.B
(c) HDMI Frame
(d) MAIN P.C.B
(e) SMPS P.C.B
Front Frame, DVD Block, DVD Drive Unit, LOADER P.C.B
  • Front Frame (a)
  • Remove the two screws [C]
  • Remove the front frame in the direction of the arrow.
DVD Block (b)
  1. Disconnect the FFC.
  2. Disconnect the connector.
  3. Remove the four screws [E].
  4. Remove the DVD block in the direction of the arrow.
DVD Drive Unit (c), LOADER P.C.B (d)
  • Disconnect the FFC from the LOADER P.C.B.
  • Remove the LOADER P.C.B from the DVD drive unit in the direction of the arrow.
(a) Front Frame
(b) DVD Block
(c) DVD Drive Unit
(d) LOADER P.C.B
(e) MAIN  P.C.B
HDD Block, HDD P.C.B, HDD
HDD Block (a)
  • Disconnect the FFC.
  • Disconnect the connector.
  • Remove the four screws [C].
  • Remove the HDD block in the direction of the arrow.
HDD P.C.B (b), HDD (c)
  • Disconnect the FFC from the HDD P.C.B.
  • Remove the screw [C].
  • Remove the HDD P.C.B from the HDD in the direction of the arrow.
(a) HDD Block
(b) HDD P.C.B
(c) HDD
(d) HDD Frame
(e)  HDD  Plate