SELF CHECK
- Self-check is used to automatically check the bus lines and hexadecimal code of the TV set. To enter Self-Check mode, keep pressing the STATUS button on the remote control and press the down (-/V) button on the TV set. To exit Self Check, switch off the TV set at the power button.
- If the CCU ports have been checked and found to be incorrect or not located then " - - " will appear in place of "O.K.".
SERVICE MODE
Set the Bass to maximum position, set the Treble to minimum
position then keep pressing the INDEX button on the remote control and press
the down button (-/V) on the TV set, this will place the TV set into the
Service Mode 1.
KEY COMMAND
- Press the RED / GREEN buttons to step ▲/▼ through the functions.
- Press the YELLOW / BLUE buttons to alter the function values, to alter White Raster use +/- buttons.
- Press the OK button after each adjustment has been made to store the required values.
- To exit the Service Mode, press the "N" button.
Click on the tables to Magnify