G2 BOARD - FOIL SIDE
ERROR CODES
CLICK ON THE PICTURES TO ZOOM IN
SCHEMATICERROR CODES
The identification of errors within the AT2X chassis is
triggered in one of two ways: - 1: Busy or 2: Device failure to respond to IIC.
In the event of one of these situations arising the software will first try to
release the bus if busy (Failure to do so will report with a continuous
flashing LED) and then communicate with each device in turn to establish if a
device is faulty. If a device is found to be faulty the relevant device number
will be displayed through the LED (Series of flashes which must be counted).