SERVICE MODE
The programming functions are used to program the various
features and functions of the machine, and to test the machine. This
facilitates communication between the user and the service man while programming
the unit.
There are 2 basic categories of programming functions, the
User Mode and the Service Mode.
The Service Mode is further broken down into
the normal and special programs. The normal programs are those listed in the
Operating Instructions and are available to the user. The special programs are
only those listed here and not displayed to the user.
In both the User and
Service Modes, there are Set Functions and Test Functions. The Set Functions
are used to program various features and functions, and the Test Functions are
used to test the various functions. The Set Functions are accessed by entering
their code, changing the appropriate value, then pressing the SET key. The Test
Functions are accessed by entering their code and pressing the key listed on
the menu. While programming, to cancel any entry, press the STOP key.
SMPS SCHEMATIC
CLICK ON THE PICTURES TO ZOOM IN