Friday, December 27, 2013

OPTICAL PICK-UP REPLACEMENT - SONY - DVP-NS15/NS51P/NS43P/NS53P/K56P


DISASSEMBLE PROCEDURE
LOADING ASSEMBLY
CLICK ON THE PICTURES TO MAGNIFY 
OPTICAL PICK-UP
Note:

Solder short land before remove the FMO-009 Flat Flexible Cable from 24 pin BU connector.
  Laser Diode in the optical Device is very sensitive to Surge Current or ElectroStatic Discharge (ESD).  After take-out FMO-009 Flat Flexible Cable from CN101 of MV-47/MV-48 board immediately ground FMO-009 Flat Flexible Cable pattern using short clip. Metal paper clip can be used as short clip.