TO ENTER SERVICE MODE
- While pressing the "Menu" key, reconnect the AC power cord.
- Service mode screen will be displayed as below.
_________________________________________________________________________________
NO DATA
xx OPT xxx xxxxxxxx
_________________________________________________________________________________
xx => Item Number
OPT => Title.
xxxx => Decimal Data.
xxxxxxxx => 8 Bit Binary Data.
- Use [Up] or [Dn] key to select desired service menu to adjust.
- Use (=) or (-) key to adjust the data value.
- Press "Menu" key to turn Off the Service Menu Display and to 'Exit" from service mode.
- After replacement of EEPROM IC (IC802), check the following items and data values.
- 03 => HP => 11.
- 04 => VS => 64
- 15 => RB => 0
- 16 => GB => 0
- 17 => BB => 0
- 18 => RD => 64
- 19 => GD => 8
- 20 => BD => 64
- 42 => RAD => 20.
- 45 => FL => 15
When EEPROM is replaced, the CPU [IC801] will automatically write the initial reference data in to EEPROM [IC802] for basic TV operation. How ever the bus data should be checked and some bus data should be set up before attempting the service adjustments.
- Disconnect the AC power cord [AC120V line].
- While pressing 'Menu' key, reconnect the AC power cord, The Service Menu will be displayed.Select the following items, and by using Up or Dn keys, adjust the data values given against each item.
- 03. HP => 8
- 05. VPO => 25
- 07. V-LIN => 15
- 10. VSC => 13.
- 14. VC => 7
- 21. SBI => 54
- 24. FLS => 1
- 28. PRE => 3
- 29. WP => 2
- 32. BSG => 2
- 34. DCR => 1.
- 37. AF => 1.
- 41. RYA => 2
- 55. STI => 19.
- 56. SSH => 8.
- 57. OPT => 0
- 58. OP-2 => 98.
- 59. HR => 20.
- 60. ATT => 7.
- 63. SBO => 2.
- Press "Menu' key to come out from service mode.
