TO ENTER SERVICE MODE
- Press the [Return+] key and [Mutin] key simultaneously to enter the service mode.
- Use [Function Up / Dn] key for scrolling Up / Dn the setting item.
- Use [Function Right / Left] key to adjust the data value to selected item.
- The setting value will be stored automatically when release the remote control unit key.
- To 'Exit" service mode, press [Menu] key by the remote control.
Service Mode Screen
-------------------------------------------------------------
SERVICE MENU VER.XXX
1. ADJUST
2. SELF CHECK.
3. I2C STOP
------------------------------------------------------------
When a number key other than [1] key is pressed in the Service Mode Screen, the other relevant screen may be displayed. This is not in the adjustment procedure. Press the [Menu] key to return to Service Mode Screen.
Adjustment Mode Screen
------------------------------------------------------------
S001 R DRIVE MID 128
NTSC3 FULL STD M
------------------------------------------------------------
S001 = Setting Item number.
R Drive Mid = Setting item
128 = data value
NTSC 3 = Signal System
Full = Zoom Mode
STD = Picutre Mode
M = White Balance.
State of Zoom Modes
- FULL: FULL
- PAN: PANORAMIC
- 16Z: 16:9 ZOOM
- SUB: 16:9 ZOOM SUBTITLE
- 14Z: 14:9 ZOOM
- REG; REGULAR
- TXT: TEXT.
Picture Mode
- STD = STANDARD
- BRI = BRIGHT.
- SOFT = SOFT.
White Balance Mode
- H = COOL
- M = MID
- L = WARM
