TO ENTER SERVICE MODE
- If you do not have Factory Remote Control;
- Press [Picture Off => Mute = 1,8,2 => Picture On]
- If you have the Factory remote control:
- Press [Picture On => Display => Factory].
- After Service Mode has been entered, the initial screen is shown in below will appear.
---------------------------------------------------------------------------------
Service
Deflection
Video adjust 1
Video adjust 2
Video adjust 3
Option [ xx xx xx ]*
Reset
G2-adjust
Others
VDP version.
----------------------------------------------------------------------------------
* The hex-data and check-sum value which depends on the Micom Version. If check-sum value is changed the value of EEROM Data newly initiated.
Use channel Up Or Dn buttons to move cursor in the adjustment parameters. When CRT, CRT PC,E2PROM is replaced, the adjustment values should be controlled.
After service adjustments are competed, Do Not select 'Reset' in the service menu mode.
After all adjustments has been done, Power is on initially and the plug and play will be operated.
