Friday, August 10, 2012

SAMSUNG - GLA26SEU LE26S81BX TFT-LCD TVs SERVICE MODE




APPLICABLE TO:     SAMSUNG TFT-LCDs:   GLA26SEU _ GLA32SEU _ GLA37SEU _ GLA40SEU _ GLA46SEU _ LE26S81BX _ LE32S81BX _ LE37S81BX _ LE40S81BX _ LE46S81BX 
TO ENTER SERVICE MODE
With customer remote control;
  • Press [Power Off => Info => Menu => Mute => Power On]
With factory remote control:
  • Press [picture On => Display => Factory].
The buttons are active in Service Mode:
  1. Remote control keys:  Power; Arrow Up; Arrow Dn; Arrow Left; Arrow Right; Menu; Enter; & number keys (0 to 9).
PANEL CHECK
Specially for LE 26, 32R7**.  Check the Panel Marker, because of different adjustments as follows.  Check the label rating.  
  • If panel mark is "A", set the factory mode indicating as follows.
  • Panel BOM (Bill Of Material):  BN07-00289A.  Connector between Panel and Power unit:BN39-00603M (300mm)
*Option Byte.
  1. Gama "AUO"
  2. Panel Option "AUO"
If panel marking is 'S" or not printed, set the factory mode indication as follows.
Panel BOM [Bill Of Material]:  BN07-00247A.  Connector between Panel and Power unit: BN39-00603M (300mm).
Option Byte
  1. Gamma "AMLCD"
  2. Panel Option "AMLCD_INT"
If panel mark is "C", set the Factory mode indicating as follows.
Panel BOM {Bill Of Material}:  BN07-00207A Connector between Panel and Power Unit: BN-39-00659A (200mm).
Option Byte.
  1. Gamma "CMO"
  2. Panel Option "CMO" All others are the same given below.
FACTORY DATA
  1. Calibration.
  2. Option Table      xxxx  xxxx
  3. W/B
  4. W/B Movie
  5. MTK8202
  6. FBE2 option
  7. Sound
  8. Sound Amp
  9. YC Delay
  10. Adjust
  11. Bus Stop
  12. Password          80  80  80  80
  13. Checksum        0000
  14. Dynamic Contrast
  15. Spread Spectrum.
  16. Reset
HDCP Write    Sucess --Or failure.
T_JSMMPEU-1000 (Main Micom Version)  Month/ Day / Year / Hour / Minute / Second
T-BRPNMNSAS-1000 (Sub-Micom version.  Only BDX Plus)
Panel On Time: (Hour)  XXXXX
CALIBRATION
  1. AV Calibration.
  2. DTV Calibration
  3. PC Calibration.
  4. HDMI Calibration
OPTION BYTE
     NO   =>   Item   =>                     CMO32"
  1. => Panel Inch                            => 32.
  2. => Panel Vendor                       => CMO
  3. => Dimming                              => Internal.
  4. => Gamma                                => Off
  5. => Auto Power                          => On.
  6. => Hotel Mode                         => Off
  7. => Shop Mode                          => Off
  8. => High Devi                            => Off
  9. => Carrier Mute                       => Off
  10. => TTX                                      => On
  11. => TTX List                              => Flop
  12. => TTX Group                          => User OSD.
  13. => TTX ATM                           => Off
  14. => HDMI Select                      => 2HDMI
  15. => Volume Table                      => Small
  16. => Sound Wattage                   => LCD 10W
  17. => HP Position                         => side
  18. => Language                            => English
  19. => HP Detect                           => Active High.