APPLICABLE TO:
JVC LT-37A80SU _ LT-37A80ZU _ LT-37DA8BJ _ LT-37DA8SU _ LT-37DA8ZU
TO ENTER SERVICE MODE- Press [INFORMATION] key and [MUTING] key on the remote control simultaneously until Service Mode Screen appears.
- Use [Function Up / Dn] key for scrolling Up or Down the setting items.
- To change the data value, use [Function Right / Left] key.
- To memorize the adjusted value, press "OK" key. After each adjustment, "OK" key must be pressed to memorize the adjusted value in memory.
- To "Exit" service mode, press "Menu" key on the remote control.
Service Mode Screen
===========================
SERVICE MENU
1. ADJUST
2. SELF CHECK.
3. I2C STOP
==========================
Note: Before entering the Service Mode, confirm that the settings of VCR/TV/DVD switch is at "TV" side.
It is not possible to enter service mode, if this switch has been set to wrong setting.
