- 1st, press menu,
- 2nd, input 8893,
- Finished these operations, system will be into the factory mode menu.
TO EXIT
To exit factory menu, press the button ”Exit” in
the remote control.
ADJUSTMENTS
Version, S/N, Panel Resolution
Version: The first line is the model Name and the
second line is current software version.
Auto Colour
The option could only be used in the VGA and Component
model. When we found the colour in the two models was abnormal. Then we can use
the function to adjust it automatically.
Color Temperature
The function could adjust the Colour Temperature., used when
debugging.
Audio
Dolby Banner: When
turn it “ON”, the model will be in Dolby authentication state.
Compression: Compression style. RF: ATV line: AV/S-Video/YPbPr/VGA
Compression Factor: Compression state.
Downmix: output model. MTS System: used when
debugging. The parameters only used when debugging, no need to be modified.
Channel
Range Scan: The function could make it to search the
channels by differentiation the analogue and digital channels.
Single RF Scan: Search channels in the frequency scope set
in advance.
Factory Scan: According to ANTENNA-ANALOG => ANTENNA-DIGITAL
=> CABLE- ANALOG => CABLE- DIGITAL to search channels, used only in
project debugging.
Tuner Diagnostic: Project debugging setting, used to inspect
the audio function.
Gamma: Bright: GAMMA0.8 Middle: default settings in the program
Dark: GAMMA1.2
Backlight: adjust the backlight.
Burning Mode: Turn
it “ON” to enter the aging model; This is for factory run-in testing. The
screen would display red, green, blue and black screen repeatedly. Each colour
screen could be exam at that time.
Clean Storage: The function could make the model turn back
to the factory default setting.
SETUP CODES
GE => 0081 0216 0217 0157
COMCAST DTA => 11034, 10768, 11009
JUMBO-66687 => 216,217
PHILIPS SRP 3004-10 => 1175
