HCD-RG66T - SONY - HOW TO ENTER ERROR CODE DISPLAY & DETAILS - Aging Mode - Ship Mode - Universal Remote Control Set-up Codes

ERROR DISPLAYS & DETAILS
Display of total error

EMC**EDC**

• EMC**: The number of mechanical error.
• EDC**: The number of no disc error after chucking the disc.

Display of mechanical errors

M*$$%%&&##00

M*: The number of mechanical error (“00” is latest one).  (Press the |◄◄ or ►►| button to changes next error display)

$$: Not used

%%: Loading error (Second figure is not used).

D: The error in the midst of close at the except mechanical trouble.

E: The error in the midst of open at the except mechanical trouble.

C: The error in the midst of chucking up at the except mechanical trouble.

F: The error in the midst of chucking down at the except mechanical trouble.

&&: Loading error

01: The error in the midst of chucking up.

02: The error in the midst of chucking down.

03: Time-out of EX-open.

05: Time-out of EX-close.

Display of no disc errors

D*$$%%&&##00

D*: The number of mechanical error (“00” is latest one).  (Press the |◄◄ or ►►| button to changes next error display)

$$: Error type

01: Focus error

02: GFS error

03: Set up error

%%: Not used

&&:

00: No disc judgment without chucking retry.

01: No disc judgment after chucking retry.

##: The state when judged no disc error

01: Stop

02: Set up

03: TOC read

04: Access

05: Play

06: Pause

07: Manual search (Play)

08: Manual search (Pause)

TAPE DECK SECTION

The sequence during the ageing mode is following as below.  If an error occurred, stop display that step.

Aging mode sequence (Tape deck section)

Click on picture to Zoom In

Note: “TAPE *AG-*” is display of each step

CD REPEAT 5 LIMIT OFF MODE

Number of repeat for CD playback is 5 times when the repeat mode is “REPEAT”. This mode enables CD to repeat playback for limitless times.

Procedure:

• Press the [POWER] button to turn the power on, and press the [CD] button to select the function “CD”.
• Press three buttons of [STOP], [REPEAT], and [CD]simultaneously to enter the CD repeat 5 limit off mode and display “REPEAT OFF”.
• To release this mode, operate the cold reset. (Refer to the “MC COLD RESET”)

CD SHIP MODE (MEMORY CLEAR)

This mode moves the optical pick-up to the position durable to vibration. Use this mode when returning the set to the customer after repair.

Procedure:

• Set to the standby state.
• Press three buttons [STOP], [ENTER] and [GAME] simultaneously.
• After the “STANDBY” display blinks, a message “LOCK” is displayed on the fluorescent indicator tube, and the CD ship mode is set.

CD SHIP MODE (NO MEMORY CLEAR)

This mode moves the optical pick-up to the position durable to vibration. Use this mode when returning the set to the customer after repair.

Procedure:

• Set to the standby state.
• Press the [CD] and [POWER] buttons simultaneously.
• After the “STANDBY” display blinks, a message “LOCK” is displayed on the fluorescent indicator tube, and the CD ship mode is set.

UNIVERSAL REMOTE CONTROL SETUP CODES FOR SONY HI-Fi : 
3063 3068 3062 3067 3066 3107 3102 3064 3065 310