PASSWORD RESET
- Omnipotence V-Chip Password: 8205.
- Press MENU button.
- Press LEFT RIGHT buttons to highlight "MISC" Menu.
- Press Up, Down buttons to highlight "Parentald".
- Press ENTER button to pop up "Input your Password Please".
- Use the Number buttons (0~9) to enter an omnipotence Password.
- Press ENTER button to confirm and your can select "CHANGE PASSWORD".
- Suggest: Change to your familiar Password again.
SOFTWARE UPGRADE
Connect the RS-232C input jack to an external control device
(such as a computer) and software upgrade.- Power Switch OFF.
- Connect the serial port of the control device to the RS-232 jack on the LCD-TV back panel. RS-232C connection cables are not supplied with the LCD-TV.
- Power Switch ON. The power indicator on the front of the panel should now display red, means that the LCD-TV is in standby mode.
- Copy the software (MTKTOOL) to the computer.
- Open the software (MTKTOOL.EXE)
- Select MTK 8205 and Point "browse" on the interface of the MTKTOOL.exe.
- Select the file which will be update.
- Point "update" on the interface of the MTKTOOL.exe.
- Waiting for the upgrade programming, when it is finished, the bar will display 100%.
- After the up grader is finished, shut down the power switch, take out the RS-232C connection after the power indicator is extinguished.
- Note: After upgrading, the first time of power on will be some long.
POWER SUPPLY [SMPS] SCHEMATIC
CLICK ON PICTURE TO ZOOM
