See the procedures to
Disassembly of Top Cabinet
Disassembly of CD Changer Unit.
Disassembly of Traverse Unit. See previous posts here.- Pull out FFC.
- Widening the catch, push the pin in.
- Remove 4 pins.
- Remove the traverse deck. Note: As floating springs (4 pieces) come off at the same time, be careful not to lose them.
- Remove 3 screws.
- Remove the CD Servo P.C.B. and turn it over. Note: Insert a short pin into FFC of the optical pickup.
- Rotate the traverse deck (B) to the arrow direction and shift the optical pickup to the furthest backward.
- Remove the catch of the drive rack, and take out the drive rack.
- Place the convex part of an optical pickup to the concave part of a traverse base, then take out the optical pickup.