Sunday, June 16, 2013

KONKA KDL-32AT23U – KDL-37AT23U – KDL-42AT23U - SERVICE MODE [FACTORY MODE]


FACTORY MODE
  • Press  the [ . ] key to  select the  page.
  • Press  the “▲/▼” to  select the item you desired change, and press the  “◄/►”to set the value.
  • Press “Exit” to exit the factory menu , the value you have changed will be save automatically.
WHITE BALANCE ADJUSTMENT
  • Receive black or white signal under AV or PC mode, adjusting brightness and contrast to set the brightness to 15Nit in dark area and 90 Nit in bright area.
  • Adjust white balance. Press[ . ] button to  select the page  adjusting  White calibration.
  • Press the ▲/▼to select the item you desired change, and press the ◄/► to set the values as follow.
Red  Offset => 1000
Green Offset => 1000
Blue  Offset => 1000
  • Then  adjusting Red gain, Green gain, Blue gain” to adjust the  chromaticity coordinates of black and white to fit the requirement.