All the circuit adjustment to these sets can be made using remote control [RM-Y188]
Enter to service mode.
* TV must be in standby mode.
** Press [DISPLAY => 5 => VOLUME UP => POWER].
Press each button within one second of pressing the previous button.
On the service menu display;
3D-COMB => CATEGORY.
0 => ITEM NUMBER.
0 => DATA
NRMD => ADJUSTMENT ITEM.
*** The screen displays the item being adjusted within that category.
**** Press [1] & [4] digit buttons on the remote to select an item for adjustment.
***** Press [3]&[6] digit buttons on the remote to change the data value to selected item.
****** Press [2]&[5] digit buttons on the remote to select the adjustment category. Every time you pres digit [2], the service mode changes.
******* If you want to go back to the most recently saved value, press [0] to read the memory.
******** Press [Muting] and then [Enter] buttons on the remote to wirite the newly adjusted data into memory.
********* To exit from the service menu, turn the power of by the ON/OFF switch at the front panel of the Tv.
Pressing digit [8] and then [Enter], to restore the factory settings for user control and channel memories.
Memory Write Confirmation.
* After adjustment, turn the Power OFF with the remote control.
** Turn the power ON and set to Service Mode.
*** Select and check the adjusted item/s, and confirm that the adjustments were saved.
No comments:
Post a Comment