To enter the service mode, press the [HIDDEN] key, at the [BOTTOM RIGHT] corner of the remote control. [It can be accessed by peeling out the front sticker of the remote control on that particular portion, and short the carbon contact seen inside for just once]
[1] Press key (1) on the remote control to enter into Service Mode.
[2] Press key (2) on the remote control, to go to Design mode.
[3] Press key (3) on the remote control, to go into Factory setting Mode.
[4] Press key (4) on the remote control, to enter the Manufacturing Mode.
[5] Press key (50 to get various Test Patterns on the screen for proper screen adjustments.
Use [CH UP / CH DOWN] keys to select an item.
Use [VOL+ / DOWN] keys to adjust the data values of the selected item.
To exit from the service mode, press the [HIDDEN] key again.
No comments:
Post a Comment