HOW TO ENTER SERVICE MODE TO TV SETS, USING [LC-863532C-57S4] IC AS SYSTEM CONTROL

* Press 'RECALL' button on the remote control.
** Press "VOL--ve button until the volume level comes to [00].
*** Do not loosen the "VOL--" button, and press the "RECALL" button on the remote control handset again.
**** If all the above operation is correct, factory logo will appear on the screen.
***** Repeat the above as stated, and it will enter into "B/W BALANCE".
****** Repeat the above operation, and, enter into "ADJUSTMENT" Menu.
******* Under this Menu, to call an item to adjust, use "P+ / P- buttons.
******* To change the data value to called item, use "V+ / V--" buttons.
******** Under the "Adjustment" menu mode, Press "Mute" button ot get page setup.
********* To "Exit' from the factory mode, switch the set OFF by its power ON/OFF switch at the front panel.
TO ENTER INTO THE LOGO SETTING
* Enter into the factory mode first.
** Press the "V--ve" button, until the volume comes to [00]. (Do not loosen the V--ve button)
*** Press "P--ve" button on the remote, and now you can change the logo.
**** Press "V+ / V--ve" buttons to the select word, and press "PP" button to move to next word.
***** Press "RECALL" button to exit from logo settings.