Remote control handset [RM-YD005]
To adjust various set features, use the remote control to put the set into service mode to display service menus. The service menus associated with both Digital and Analogue format, depending on which format is on the TV when you enter service mode.
To Enter Service Mode
* Turn the TV On, and view a Digital Channel.
** Put the TV to Standby Mode. [Power OFF by remote control].
*** Press the following buttons in sequence within a second.
[DISPLAY_CHANNEL 5_ VOLUME+_POWER ON]
The digital service menu displays.
Press DN button to videw the next category [White Balance Adjustment]
To call an item to adjust, use [UP/DN] buttons.
To increase or decrese the data value to item, use [Right Arrow or Left Arrow] buttons.
To save the data, Press DN button to select, (Color Save) and press the [+] button.
To cancel the data value changes, Press "UP" button and then press [+] button.
Analogue service adjustments.
* Turn ON the Tv, and view an analogue channel.
** Put the Tv into standby mode [Power OFF].
*** Press [ DISPLAY _ CHANNEL 5 _ VOLUME + _ POWER ON].
The Analogue service menu will be displayed.
Use all the above described proceedings to adjust the data values to this mode too.
Viewing digital Module Box[ Q-BOX] service items.
*Turn the TV On, and view a digital channel.
** Put the TV to standby mode [Power Off by remote button].
*** Press [DISPLAY_CHANNEL-5_ VOLUME + _ POWER ON].
**** To display digital Module {Q-BOX] service items, press "Jump".
The display shows
QM -- category.
[0] -- Item #.
[0] -- Data value.
INFO -- Item.
To change a catogory, press digits [2]&[5] on the remote control.
Note: Pressing [2] or [5] only changes the catagories within the service menu displayed. To retrun to digital service menu, press [JUMP] button.
To call an item for adjustment, use [1]&[4] buttons.
To adjust the data vlaue to selected item, use [3]&[6] buttons.
To go back the last saved data value, press [0] and then press [ENTER] on the remote to read the memory.
To write into the memory, press [muting] and [ent] buttons on the remote.
To exit from service mode, Turn the power OFF.
Resetting the user menu to Factory Settings.
Put the set in service mode, as described above.
Use [Dn] button, until [TEST RESET] option window dislays.
Press [+] button to select 'Test Reset' options.
Press [Dn] button to select OK.
Press [+] button again to reset the Tv.
To adjust various set features, use the remote control to put the set into service mode to display service menus. The service menus associated with both Digital and Analogue format, depending on which format is on the TV when you enter service mode.
To Enter Service Mode
* Turn the TV On, and view a Digital Channel.
** Put the TV to Standby Mode. [Power OFF by remote control].
*** Press the following buttons in sequence within a second.
[DISPLAY_CHANNEL 5_ VOLUME+_POWER ON]
The digital service menu displays.
Press DN button to videw the next category [White Balance Adjustment]
To call an item to adjust, use [UP/DN] buttons.
To increase or decrese the data value to item, use [Right Arrow or Left Arrow] buttons.
To save the data, Press DN button to select, (Color Save) and press the [+] button.
To cancel the data value changes, Press "UP" button and then press [+] button.
Analogue service adjustments.
* Turn ON the Tv, and view an analogue channel.
** Put the Tv into standby mode [Power OFF].
*** Press [ DISPLAY _ CHANNEL 5 _ VOLUME + _ POWER ON].
The Analogue service menu will be displayed.
Use all the above described proceedings to adjust the data values to this mode too.
Viewing digital Module Box[ Q-BOX] service items.
*Turn the TV On, and view a digital channel.
** Put the TV to standby mode [Power Off by remote button].
*** Press [DISPLAY_CHANNEL-5_ VOLUME + _ POWER ON].
**** To display digital Module {Q-BOX] service items, press "Jump".
The display shows
QM -- category.
[0] -- Item #.
[0] -- Data value.
INFO -- Item.
To change a catogory, press digits [2]&[5] on the remote control.
Note: Pressing [2] or [5] only changes the catagories within the service menu displayed. To retrun to digital service menu, press [JUMP] button.
To call an item for adjustment, use [1]&[4] buttons.
To adjust the data vlaue to selected item, use [3]&[6] buttons.
To go back the last saved data value, press [0] and then press [ENTER] on the remote to read the memory.
To write into the memory, press [muting] and [ent] buttons on the remote.
To exit from service mode, Turn the power OFF.
Resetting the user menu to Factory Settings.
Put the set in service mode, as described above.
Use [Dn] button, until [TEST RESET] option window dislays.
Press [+] button to select 'Test Reset' options.
Press [Dn] button to select OK.
Press [+] button again to reset the Tv.
No comments:
Post a Comment