Electro help: HOW TO ENTER SERVICE MODE TO VIDEOCON/SANSUI TVs

Monday, April 09, 2012

To enter into service mode to these sets, press the service key [S].
If you press numerical key 1, the set will put into service mode.
Pressing digit key 2, the set will be put into Design mode.
Pressing digit key 3, will put the set into factory reset.
Pressing digit key 4, will put the set into Manufacturing mode.
To select an item to adjust, use [CH Up / CH Dn] keys on the remote control.
To adjust the data value of the selected item, use [Vol+ / Vol--ve] keys.
Press service key [S] again, to quit service mode.