Monday, September 30, 2013

DEFECTS_SYMPTOMS & DEFECTIVE PARTS _ PLASMA TVs_DEFECTIVE SCREEN SHOTS

PLASMA DISPLAY DEFECTS
No Voltage Output
Operating Voltages don't exist.

PSU [Power Supply Unit]

No Display
Operating Voltages exist, but an Image doesn't exist on screen

Y-MAIN, X-MAIN, Logic Main, Cables

Abnormal Display
Abnormal image (not open or short) is on screen.

Y-MAIN, X-MAIN, Logic Main
Sustain Open
Some horizontal lines don't exist on screen

Scan Buffer, FPC of X/ Y

Sustain Short
Some horizontal lines appear to be linked on screen


Scan Buffer, FPC of X/ Y
Address Open
Some vertical lines don't exist on screen

Logic Main, Logic Buffer, FFC,TCP

Address Short
Some vertical lines appear to be linked on screen
Logic Main, Logic Buffer, FFC, TCP
A line or block does not light up in address electrode direction. (1 line, block open).
Manufacturing: Panel electrode single line/ foreign material./electrostatic/ TCP defect.
Another color simultaneously appears because adjacent data recognizes the single pattern signal.
Manufacturing: Panel electrode short/ Foreign material conductive foreign object inside TCP.
A defect other than address open and short Data printout signal error occurring at certain Gradation or pattern.
One or more line do not light up in Sustain direction.
  • Manufacturing:. Panel bus electrode single line FPC pressure defect.
  • Parts: FPC/board/connection disconnection
  • Operation: assembly error.
Sustain (horizontal stripe) Short.
Combined or adjacent lines are short in sustain direction. The line appears brighter than other at Ramp gradation pattern or low gradation pattern.
Dielectric material layer damage.
Burn caused by the damage of address bus dielectric layer appears in the panel discharge/non discharge area. sustain also open/short occurs by the damage of address sustain printout. [Add Block and Line Open]
  • Manufacturing: Panel electrode short/Foreign material.
  • Parts: Board/ connector/pin error
  • Operation: connector / assembling error.
Add and Sustain Open.
Layer uneven / abnormal voltage / foreign material repair failed.