- If you do not have Factory remote – control; [Power OFF à MUTE à 1 à 8 à 2 à Power ON]
- If you do not have Factory remote – control; [INFO à factory]
SOFTWARE UPGRADE
- Downloading the latest firmware from samsung.com to a USB memory device can perform software Upgrade.
- Current Version - the software already installed in the TV.
- Software is represented as ‘Year/Month/Day_Version’.
TO CHECK SOFTWARE VERSION
- Use the main menu
- Click the “menu” key in remote controller.
- Select Support menu.
- Locate the menu cursor “Software Upgrade” menu.
- Click the “info” key.
- Check the Main SW and Micom version.
Access the factory
mode.
CLICK ON THE PICTURES TO ZOOM. Click ß at the top of the
browser, to come back.
SOFTWARE & MICOM UPGRADE
Insert a USB drive containing the firmware upgrade
downloaded from samsung.com into the TV.
Be careful to not disconnect the power or remove the USB drive while
upgrades are being applied. The TV will turn off and turn on automatically
after completing the firmware upgrade. Please check the firmware version after
the upgrades are complete (the new version will have a higher number than the
older version). When software is upgraded, video and audio settings you have
When software is upgraded, video and audio settings you have you write down
your settings so that you can easily reset them after the
upgrade.
MAIN SOFTWARE UPGRADE
- Store the sw program named “T-MST5IBRC” in USB memory stick.
- Connect the USB.
- Connect TV and online line.
- Select. Support menu.
- Locate the menu cursor “Software Upgrade menu.”
- Click the “ENTER” key.
- You can upgrade by USB or Online.
- Click the “ENTER” key.
- Wait for upgrade complete and check the SW version.
SUB-MICOM UPGRADE
You can upgrade sub micom in factory mode without DDC
program. But it takes long time about 5
minutes.- Access the Factory mode.
- Select the “SVC” menu and locate the cursor “MICOM UPGRADE” menu.
- Click the “ENTER” key.
- Click the “right” key.
- Wait for upgrade complete and check the Micom version.
