PANASONIC LASER FAX - DX2000 - HOW INSTALL MEMORY CARD - HOW TO INSTALL TONER CARTRIDGE

MEMORY CARD INSTALLATION
Before installing, make sure that there is no document file(s) stored in the memory. You may confirm by printing out a File List (see page 139 of the User's Guide). When the memory card is installed, the machine will initialize the document memory, all contents stored in the document memory at that time will be lost.

• Turn the Power Switch to the "O" (OFF) position located in the rear of the machine.
• Open the ADF Door.
• Remove a Screw.
• Remove the Memory Card Cover.

• Insert the Memory Card(s) gently into the card slot with the Panasonic logo facing to the rear.

Caution: Installing the Memory Card(s) in the wrong direction may damage the connecting pins inside the machine.

• Reinstall the Memory Card Cover and the Screw to secure the Cover.

Close the ADF Door.

• Turn the Power Switch to the "I" (ON) position. Print out the Fax Parameter List (see page 180 of the User's Guide) and confirm that the memory size on Fax Parameter No. 099.

1. The document(s) stored in memory will be lost if the memory card is removed.

2. The memory size on Fax Parameter No. 099 is only shown for the Flash Memory Card.

TONER CARTRIDGE INSTALLATION

• Unpack the Toner Cartridge and rock it back and forth as shown for 5 or 6 times to even the toner inside.
• Remove the protective seal.  Note: Pull on the seal slowly and straight out.
• Push the Release Button to open the Printer Cover.

• Align the arrow and the projection on both sides as shown and insert the Toner Cartridge into the machine.
• Close the Printer Cover firmly.

If you are replacing the Toner Cartridge, it is recommended to clean the Printer Roller to maintain good printing quality. To clean the Printer Roller, follow the procedure on the User's Guide.