POWER SUPPLY VOLTAGES ADJUSTMENT
Vs adjustment.
- Connect + terminal of D.M.M. to Vs pin of P811, connect -terminal to GND pin of P811
- After turning VR901, voltage of D.M.M adjustment as same as Vs voltage which on label of panel left/top (deviation; ±0.5V)
Va adjustment
- After receiving 100% Full White Pattern, HEAT RUN.
- Connect + terminal of D.M.M. to Va pin of P811, connect -terminal to GND pin of P811.
- After turning VR502,voltage of D.M.M adjustment as same as Va voltage which on label of panel left/top (deviation; ±0.5V)