HISENSE LCD 19W57LCD 19W29EULCD 26W57LCD 32W57 Software Upgrade [Contn:]

Software Upgrade:  Contn:
[2]
Find the folder where the ISP_TOOL4.0.9 lies in.
There are '3' folders/files in this folder together.
DLPORTIO.dll and FTD2XX.dll must be in the same folder.

Double click the ISP_TOOL4.0.9 icon, and then a dialogue window will be shown as below.

Click the 'Config' button.
A dialog window will shown as below will appear.
Port Type setting is LPT1.
Base Addr setting is 0x378.
Draw [Check] on the front of "pin 1 switch UART/I2c"
Speed setting is 99.

Choose [SDA in] and setting {PIN} is {PIN 10].
Do not draw (Check) on the front of "Reverse High".
As following;

Choose "SCL in" and setting  "PIN" is "PIN 11"
Do not draw(Check) on the front of "Reverse high".
As following:

Choose 'SDA out" and setting "PIN" is "PIN4".
Draw (Check) on the front of "Reverse high".
As following:

Choose "SCL out" and setting  "PIN" is "PIN2".
Draw (check) on the front of "Reverse High".
As following:

After having finished all above, clicking the "Apply" button to complete the configuration.
See the previous post for beginning setup.