How to enter service mode BenQ - E2400HD-LCD TV
TO ENTER FACTORY OSD MENU- Turn OFF the monitor.
- Keep pressing the "Menu" + "Enter" buttons, and turn ON the monitor.
- Press 'Auto' button.
- The Factory OSD will appear as below.
TO ENTER SERVICE MODE PAGE.
- Trigger method: Press "Menu" key & Power ON.
- Press the "Menu" key will display the service page.
- Press 'Menu" key will close the Service page.
- Power OFF will quit the Service Mode.
- At the Service Mode, the key functions are same as normal OSD define.
- The Timer can only Reset at the Service Mode, by "Timer Reset". Need to have a warning message to double confirm the Reset function. The timer should record up to'99999' hours.
- Add one select item for HDCP (DVI) port, Mode-1, Mode-2 at Service Menu;
- Mode-1: To enable the hot plug pin detection. [HDMI port default]
- Mode-2: To disable the hot plug pin detection [DVI port default]
- Add BenQ Logo On/Off item, the default is ON.
- Add the auto power On item, the default is OFF.
- Add the Timer Reset warning message, when select the timer reset item, then the warning message will display and need to confirm it again. The default is 'No'.
- Panel type define need to have the panel version.
- F/W version need to define the dual or analog model.
Service Page illustration:
