PLASMA PANEL DAMAGE
Symptom:
No image appears in some cause depending on the damaged part/s and damage level. [Panel crack of break.
Cause: # Manufacturing: Flatness | palette pin interruption. ## Operation: Overload of panel corner | careless handling. ### Panel: Flatness | assembly error.
Exhaust pipe damage. If exhaust pipe has damaged, an image will be partially lacking or the panel noise occurs depending on the damaged parts and after certain time; or a Very Loud Noise from the panel. Careless panel handling might be the cause. Manufacturing defect also can be the cause.
Exhaust tip cracked:
Check the tip for cracks with naked eye to check vacuum state. If there is problem with exhaust tip, it is not possible to rectify. Panel replacement is the only remedy.
Exhaust not damaged [Good]
Cracked Exhaust. There may be a small crack which could not see with naked eyes. And this noise will be different to capacitor noise.
Contd: