VIEWSONIC N3252w-1M VS11335-1M LCD TV - SERVICE MENU

Test Display Mode

• Timing:  1366*768@60Hz
• Pattern: 16*12 pane.
• Press "POWER", 'UP' & 'ENTER' at the same time.
• The factory Mode will be displayed.

Caution:

Make sure to remember the the password set to this TV.  It cannot recall the default setting of password by any selection. 

VGA DDC Key In Procedure.

• Every time after replacing the Main Board, have to do DDC Key In.
• If DDC does not confirm to the LCD TV, Key In method  follows.

Equipment needed

1. DDC Card.{Display Data Channel}
2. PC
3. RS-232 cable.
4. Barcode Reader.
5. VGA cable.

                                      Connect VGA card and DDC card with RS-232 cable

Connect DDC card and N3252W LCD TV with VGA cable. [When key in DVI DDC inormation, use VGA trasform to DVI port.]
Connect Power cord to TV.
                                                                  Run DDC.exe

                                                            Choose model number

                                                               Press "Enter" key.

                                                                Press "F4" key.

                                                                Input Barcode

Press "Enter" key.  The successful picture is as follows.  "DDC DOWNLOADED OK"

Exit program.
HDMI DDC KEY IN PROCEDURE [will continue by next post]