PHILIPS MAGNAVOX - 37MF437_42MF437_47MF437_47PFL5432D_42PFL5432D _ SERVICE MODE _ ERROR CODES

TO ENTER SERVICE MENU [FACTORY MENU]

• Press" Menu" in normal operation mode to enter OSD.
• Press "062596+Menu" on the button (RC) remote control in OSD.
• Press "Menu" again. The screen will appear "FAC" in top right corner.

OSD BEHAVIOR

Before press number key change OSD item

Now remove previous function, press number key then press OK will change value.

• Select Smart picture to display a list of predefined picture settings, each corresponding with specific factory settings.
• Personal refers to the personal preference settings of picture in the picture menu.

Note: This Magnavox TV has been set at the factory to look best in bright store environments, which typically use fluorescent lighting. As your home will likely not be as well lit as a store, we recommend that you cycle through the various smart picture modes to find the one that best suits your own viewing conditions. Most consumers will find that Natural is the correct choice.

You can press the Smart picture button on the remote control repeatedly to select either Personal, Rich, Natural, Soft, or Powersaver picture settings.

Note:   When you watch programs by Composite Video signal, it’s recommended to select Soft or  

             Power saving Mode via Smart picture. 

            The moment you are in a predefined Smart picture setting and you modify the Picture menu, all values of the menu will overwrite   those previously made in personal setting.

ERROR CODES

Error code          Event

0x01                   DDR error

0x02                   IIC bus error

0x03                   Tuner error

0x04                   Demod error