SAMSUNG LE-26A33J _ LE-32A33J _ LE-37A33J _ LE-33A33JN _ LE-40A33J _ SERVICE MODE _ CALIBRATION METHODS

TO ENTER SERVICE MODE [FACTORY MODE]

To enter ‘Service Mode’ Press the remote -control keys in this sequence :

If you do not have Factory remote – control:

[INFO] > [MENU] > [MUTE] > POWER ON]

If you have Factory remote – control:

[PICTURE ON] > [DISPLAY] > [FACTORY]


COLOR CALIBRATION [AV]

• Apply the NTSC Lattice (N0. 3) pattern signal to the AV IN 1 port
• Press the Source key to switch to “AV1” mode
• Enter Service mode
• Select the “Calibration” menu
• Select the “AV Calibration” menu.
• In “AV Calibration Off” status, press the [> ] key to perform Calibration.
• When Calibration is complete, it returns to the high-level menu.
• Can see the change of the “AV Calibration” status from Failure to Success.

COLOR CALIBRATION [COMPONENT]

• Apply the 720p Lattice (N0. 6) pattern signal to the Component IN 1 port
• Press the Source key to switch to “Component1” mode
• Enter Service mode
• Select the “Calibration” menu
• Select the “Comp Calibration” menu.
• In “Comp Calibration Off” status, press the [> ] key to perform Calibration.
• When Calibration is complete, it returns to the high-level menu.
• Can see the change of the “Comp Calibration” status from Failure to Success.

COLOR CALIBRATION [PC]

• Apply the VESA XGA Lattice (N0. 21) pattern signal to the PC IN port
• Press the Source key to switch to “PC” mode
• Enter Service mode
• Select the “Calibration” menu
• Select the “PC Calibration” menu.
• In “PC Calibration Off” status, press the [> ] key to perform Calibration.
• When Calibration is complete, it returns to the high-level menu.
• Can see the change of the “PC Calibration” status from Failure to Success.

COLOR CALIBRATION [HDMI]

• Apply the 720p Lattice (N0. 6) pattern signal to the HDMI1/DVI IN port
• Press the Source key to switch to “HDMI1” mode
• Enter Service mode
• Select the “Calibration” menu
• Select the “HDMI Calibration” menu.
• In “HDMI Calibration Off” status, press the [ > ] key to perform Calibration.
• When Calibration is complete, it returns to the high-level menu.
• Can see the change of the “HDMI Calibration” status from Failure to Success.