WATSON - TW 204M _ SERVICE MODE _ ADJUSTMENT

How to enter service mode to Watson 20 inch television

TO ENTER SERVICE MODE

• In the Stand-By mode, the factory(Service) mode is activated by pressing the DISPLAY + MENU + 3 + 8 + POWER(ON) button in sequence on the remote controller.
• The menu of the factory mode will be displayed.
• Select each adjustment mode by pressing CH up or CH down button.
  And access it by pressing vol up(+)or vol down(-) button.

The factory mode consists of 9 components:

1. SCREEN
2. W.BAL
3. PICTURE
4. SERVICE1 > ;You do not need to Select it.
5. VOLUME TEST > ;You do not need to Select it.
6. Device Check  > You do not need to Select it.
7. OPTION
8. EEPROM Reset  > You do not neet to Select it
9. UOC Control  > You do not need to Select it.

V-CHIP TEST  > You do not need to Select it.

To Exit service mode, switch OFF the set by its front panel Power Switch.